Heat Pump Technology: A Conversation with Taco’s Mark Chaffee

Share With:

Mark Chaffee, Heat Pump technology, heat pump, Taco Comfort Solutions, carbon reduction, electrification, HVAC Mechanical Hub continues its conversation regarding heat pumps and heat pump technology. Electrification and carbon reduction is core to the emergence of heat pump technology. We recently spoke with Mark Chaffee, VP Governmental Affairs and Commercial & Industrial Product Management, Taco Comfort Solutions.

MH: What are some of the driving forces behind heat pump technology?

Chaffee: The key, driving factor is a desire for CO2 reduction by using less fossil fuel. The world’s leading cultures and political forces have chosen to pursue beneficial electrification as a key component to achieve reduction goals.  So, how is it that we can most quickly, substantively reduce our dependence on fossil fuels—a key contributor to carbon emissions?  Heat pump technology is the HVAC industry’s best foot forward in achieving this today.

The effort to accomplish decarbonization is broken into two primary camps:  a.) at the grid (source) level, and b.) equipment (local).

At the grid level, our 50 states are all at different places in implementing this.  And, for the technology that’s involved residentially, and commercially, the ability of heat pumps to deliver COP’s (coefficient of performance) of 3, 4 and 5—meaning operational efficiencies of 300, 400 and 500 percent, or more— can’t be ignored.  In comparison, fossil fuel burning equipment can achieve efficiencies of maybe 92 to 98 percent at best.

Mark Chaffee, Heat Pump technology, heat pump, Taco Comfort Solutions, carbon reduction, electrification, HVAC

The goal:  clean, efficient grid energy in combination with the highest efficiency HVAC solutions possible.  Then install some solar panels on your house or commercial building (distributed green energy) for another win.  Heat pumps measure up effectively as viable equipment solutions to keep people comfortable year-round.

MH: What are the benefits of heat pump technology?

Chaffee: At Taco Comfort Solutions, we believe that the best, no-compromise product offering comes from air-to-water systems; we want to be sure they have a seat at the table. They offer extreme energy efficiency, and the finest heating and cooling solutions with the greatest options and flexibility for delivery of that comfort—such as low-temperature radiant heat and towel warmers, etc.  And: cooling, too. Hydronic technology is the undisputed king of comfort for humans.

Mark Chaffee, Heat Pump technology, heat pump, Taco Comfort Solutions, carbon reduction, electrification, HVAC With so many other heat pump technologies (for instance, mini splits, VRF or split system HVAC equipment), refrigerants are the means of thermal exchange across all facets of the distribution network.  Refrigerant lines may pierce roofs, and course their way through attics and walls from condensing units to air handlers or terminal units. We prefer the much improved means of using water as the primary source of distribution; it’s safer, less expensive and more efficient. We know water to be the cleanest and most efficient medium of thermal exchange.  Simply, more BTUs can be transported by water than by refrigerant compounds or by forced air.

We aren’t comparing heat pumps with boilers here. For generating high temperature water, there’s nothing better than a sturdy boiler. On the other hand, we are comparing air-to-water heat pumps with forced air systems and traditional ground-sourced geothermal systems, the latter of which can also consistently provide efficient, decarbonized comfort, though with substantial up-front costs to accomplish geoexchange.

Air-to-water heat pumps are a viable solution and can deliver no-compromise, year-round comfort without wells, deep and grouted boreholes, trenches, or underwater heat exchangers.

Heat pumps offer extreme efficiency, with heating and colling for year-round comfort. Some of them, like ours, also provide super-efficient heating of domestic water—all from a single appliance-like device.

MH: Do you see demand for Heat pumps more on the residential side than commercial? What’s the ratio?

Chaffee: We’ve all seen the explosive growth of mini-splits in the US residential market. To a large extent, homeowners have accepted and appreciate them. In the commercial sector, VRF technology has also seen broad acceptance, but there’s a tougher battle for dominance of the market—including the hydronic technology that we at Taco have invested in heavily.

Air-to-water systems represent a small percentage of both markets—residential and commercial—though with great potential for growth. After all, their superior comfort and technology offerings is matched with the ability to decarbonize. They can also handle the domestic hot water loads as part of a singular system.

Mark Chaffee, Heat Pump technology, heat pump, Taco Comfort Solutions, carbon reduction, electrification, HVAC

Consider, too, that a lot of refrigerant compounds have come and gone in the last couple of decades. As increased regulatory and environmental efforts removed more from the market, the long-term viability of distributed refrigerant-based systems comes into question. Why rip out and replace an existing system just because refrigerant laws change? Hydronics has always been able to adapt and upgrade to environmental, regulatory or technology changes.

I hope we see a great deal more demand for water-based systems in both the commercial and residential markets to help meet the demands for a low carbon society.

A ratio?  Right now, the growth trend is affecting both markets equally, though overall—the residential market has seen faster growth initially.

MH: Can the grid support a HP transition?

Chaffee: Probably not, in its current state. But that won’t stop anyone from trying to achieve 100 percent clean energy. But, there’s a lot of work to be done to improve grid conditions before this can accomplished.

MH: Is a different skill set required for installation?

For the most part—no. Most trade professionals in the market today have everything they need—from expertise on tap, skills and tools—to accomplish proper installation of heat pumps. Those who already have a refrigerant license have a step up. Though, what little refrigerant  there is within our System M is fully sealed at the factory in the outdoor unit, so no refrigerant license is needed to install the unit.

Mark Chaffee, Heat Pump technology, heat pump, Taco Comfort Solutions, carbon reduction, electrification, HVAC

There are two types of heat pumps as defined by refrigerant technology:

  • Monobloc—all refrigerant and the compressor are within the exterior unit, factory-sealed; refrigerant-to-water is the medium for thermal exchange. Only water moves to and from the exterior unit to the home or business for space conditioning.
  • Split—these systems move refrigerant from the outside condensing unit to the inside of a structure in the process of air-to-refrigerant, or refrigerant-to-air thermal exchange.

MH: Life expectancy compared to boilers?

Chaffee: Nothing lasts like a boiler. Though many improvements have been made to boilers through the years, chiefly to enhance efficiency, their ability— by design—to heat water and transport it out for distribution, and then back again, is unsurpassed. In round numbers, a boiler’s lifespan is about 30 years.

Now, consider the rate new HVAC technology introductions over the past decade or so. In that same 30 years, a lot of new technology will emerge to supplant any appliance on the market today, and some will see the influence of refrigerant compounds that will be legislated-out, making them obsolete. It’s become broadly accepted that if an appliance lasts 15 to 20 years, its met its expectation.

Essentially, today’s air-to-water heat pump systems are appliances— considering their construction and durability. With proper installation and routine maintenance, they should last 15 to 20 years.

MH: Will you offer training for these products?

Chaffee: Yes. Taco provides training for all of the technology it offers to the market. We’re passionate about the support we offer to installers and system designers, the System M air-to-water heat pump will allow us to continue to educate on products and system design, especially as we look to implement high performance, energy efficient HVAC system.

MH: Other thoughts?

Chaffee: Glad you asked!  We’ve heard this question on many occasions from a wide range of trade professionals: “Why does Taco want to offer this technology?”

The answer stems from our combination of expertise in hydronics, thermal distribution and comfort. These different facets meet and combine uniquely in our newest technology—the System M. It’s a single-source, air-to-water, turnkey heat pump system designed and built to meet the comfort and efficiency needs of a low-carbon society.

If we at Taco can help the trade to accomplish this, all the better. After all, that’s been an important part of our makeup dating back more than 100 years now. In the past decade or so, we’ve made a concerted effort to move from our role as a component manufacturer to that of a systems provider. With System M, we’ve combined no-compromise comfort with environmental benefits. And, considering that the technology is easy to size and install, it’s a win-win from many perspectives.