Being the first to get my hands on the new M18 Brushless Threaded Rod Cutter was an honor.
The all thread cutter (2872-20) delivers clean, burr-free cuts for threading nuts on by hand. It also has the power to cut through 1/4”, 3/8” and 1/2″ mild steel or 1/4” and 3/8″ stainless steel threaded rod in seconds.
The new tool features a unique design with a 1-1/2” built-in trim length and one-handed center grip for making uniform, controlled overhead cuts. This also offers users the clearest line of site for the most accurate cuts. Not only is the tool optimized for overhead cutting, but it can also be laid flat on its back for pre-fab cutting as seen in the video.
A brushless motor and an M18 2.0Ah Battery allow this tool to deliver over 400 nut-ready cuts per charge, reducing the need to file the threaded rod before applying the nut. The die includes 3 different cutting sizes, which can be changed by rotating the dies, allowing users to cut the most common sizes of threaded rod. Milwaukee’s REDLINK™ electronics allow the tool’s jaw to auto-retract back to home after each cut so users are ready for the next cut right away.
All these features work together to prevent burrs, chips, and sparks – all common frustrations when using non-dedicated tools to cut threaded rod.
Join the conversation: