Hilti’s newest laser entry into the cordless layout and measurement category comes with proven tech in a robust package. There is no shortage of line lasers on the market today. The PM 30-MG cordless multi-line laser from Hilti is 360 degree green beam laser powered by their Li-Ion B 12/2.6 battery. I have been working Read more
ProStaff
Hilti’s newest laser entry into the cordless layout and measurement category comes with proven tech in a robust package.
There is no shortage of line lasers on the market today. The PM 30-MG cordless multi-line laser from Hilti is 360 degree green beam laser powered by their Li-Ion B 12/2.6 battery.
I have been working with the PM 30 Hilti laser for a couple months, primarily using it for simple layout and leveling in different tasks like panel radiator installs or boiler piping layouts. I’ve used both the included wall mount bracket and magnetic base. The PM 30-MG has a very useful fine adjustment dial at the base that makes for quick alignment when rotated either direction.
Bracket alignment for hydronic panel radiators.
The Hilti PM 30-MG is intended for indoor use
Hilti has other laser models intended for outdoor use but as stated in the manual the PM 30-MG can be used outside if conditions are dry (manual pg 5, sec 3.2). Its intended use is to allow a single person to transfer right angles, level horizontally, carry out alignment work and plumb accurately.
The product has three green 360° laser lines, a reference point directed downward on the right-hand front of the measuring device, as well as four beam intersection points (front, back, left, right and above) with a range of approx. 65ft/20 m. Range depends on the brightness of ambient light.
How long will the battery last?
Runtime will vary based on laser projection. The ability to select plumb, level or cross-line (both plumb & level) beams depending on the job at hand will determine the battery life. Max operating time is published at 12 hours, I have used the PM 30-MG enough for one battery recharge but the bulk of my use has been in the cross-line mode. The selection of beam projection is easily done with a single button on the side of the laser housing.
Self-leveling or Locked
The Hilti PM 30-MG can be set to auto-level or locked for use of setting slope. This is done with the sliding power button on the side of the unit. In the locked position the leveling pendulum is fixed allowing for grade or slope projection on a horizontal plane. Moreover, the unlocked (most used mode) will allow the pendulum to self-level. If the laser is not able to self level the projected beam(s) will blink rapidly until corrected.
The tool complies with Laser Class 2 in accordance with IEC / EN 60825-1: 2014 and in accordance with CFR 21 Sec. 1040 (FDA). These devices can be used without further protective measures. Nevertheless, as with the sun, do not look directly into the light source. If you do inadvertently look into the laser beam, immediately close your eyes and move your head clear of the laser beam. Do not aim the laser beam at persons.
Finally, the Hilti PM 30-MG is backed by Hilti’s 20 year materials and workmanship, 2 year wear & tear coverage and 1 day turnaround in the repair center warranty. The Hilti PM 30-MG laser was shared with mechanical-hub.com ProStaff member Eric Aune via Hilti’s tool lease program free of charge and will be returned after use required for full tool review. You can find more info for this and other Hilti products and tools on their website: hilti.com
Job site pics of the Hilti PM 30-MG
With a intended max working range of 65ft the line stays crisp at 40 in shaded daylight.
Same conditions and site as the 40′ measurement, at 80 feet the line is getting much thicker and less crisp.
Mechanical Hub Media ProStaff Director Eric Aune chatted with Lee Browning, BIM and Estimation Supervisor at Uponor’s North American headquarters in Minnesota to discuss how Uponor’s Estimation and BIM services provides solutions for engineers and contractors. Onsite Jobsite Video: Uponor’s BIM and Estimation Services Read more
Mechanical Hub Media ProStaff Director Eric Aune chatted with Lee Browning, BIM and Estimation Supervisor at Uponor’s North American headquarters in Minnesota to discuss how Uponor’s Estimation and BIM services provides solutions for engineers and contractors.
Onsite Jobsite Video: Uponor’s BIM and Estimation Services
https://youtu.be/EbrGzskHRLo Ken Watson, VP of Marketing at Taco Comfort Solutions shares Taco’s high-efficiency comfort connection focus and new products available for residential and commercial plumbing markets. To see the Taco Comfort Solutions visit at www.tacocomfort.com Read more
https://youtu.be/EbrGzskHRLo
Ken Watson, VP of Marketing at Taco Comfort Solutions shares Taco’s high-efficiency comfort connection focus and new products available for residential and commercial plumbing markets.
To see the Taco Comfort Solutions visit at www.tacocomfort.com
Independent testing shows new Greenlee® PVC Cutter reduces operator hand force and that mechanical and electrical contractors will appreciate the simplistic design that delivers straight, burr free cuts. Greenlee Textron Inc., is expanding its PVC cutter offering with the new 1 5/8-inch O.D. PVC Cutter. Its comfortable rubber grips and shorter handle span reduce the required handle Read more
Independent testing shows new Greenlee® PVC Cutter reduces operator hand force and that mechanical and electrical contractors will appreciate the simplistic design that delivers straight, burr free cuts.
Greenlee Textron Inc., is expanding its PVC cutter offering with the new 1 5/8-inch O.D. PVC Cutter. Its comfortable rubber grips and shorter handle span reduce the required handle force for easy ergonomic cutting of PVC.
https://youtu.be/kwycoUptevc
“Professional contractors are getting a premium PVC cutter that is durable, functional and safer to use,” says Dale Speggen, product manager at Greenlee. “Having low handle force not only means the new PVC Cutter reduces hand strain, but it allows for more cuts per day, which can increase user productivity.”
Third-party testing performed by Materials Engineering, Inc. shows the new Greenlee 1 5/8-inch cutter requires less operator handle force than competitive 1-5/8-inch O.D. PVC cutter models made by Klein Tools® (21.9 percent less force), Ridgid® (36 percent less force), and Lenox® (69 percent less force) when cutting 1-5/8″ O.D. schedule 40 PVC. See how the Greenlee 1 5/8-inch O.D. PVC Cutter compares to other cutters on the market at Greenlee.com/PVCCutter.
A right-angled jaw and a corrosion resistant blade are designed to achieve burr-free, clean, straight cuts with every use. The new Greenlee 1 5/8-inch O.D. PVC Cutter is also designed for the easiest quick-blade replacement on the market, allowing the user to efficiently change blades without using tools or loose parts. The new locking mechanism feature located at the top of the tool is designed to prevent unintentional locking while in use. A unique compact storage process gives operators the ability to store the PVC Cutter with the blade fully open or closed without the risk of having an exposed blade.
The new Greenlee 1 5/8-inch O.D. PVC Cutter (catalog number 864QR) is now available for purchase. Professionals can see the new PVC Cutter in action at Greenlee.com/PVCCutter. To schedule a demonstration or purchase the tool, contractors should locate the nearest dealer by visiting Greenlee.com/where-to-buy.
https://youtu.be/5pajEpHuDUs Eric Aune talks to Chip O’Neil with Reliance Worldwide Corporation about several brands and products in their booth at the 2018 AHR Expo. The many products focused on plumbing for residential and commercial applications that serve the new residential and commercial construction markets, service & repair market & water heater installations. To learn Read more
https://youtu.be/5pajEpHuDUs
Eric Aune talks to Chip O’Neil with Reliance Worldwide Corporation about several brands and products in their booth at the 2018 AHR Expo.
The many products focused on plumbing for residential and commercial applications that serve the new residential and commercial construction markets, service & repair market & water heater installations.
To learn more about the solutions provided by the Reliance Worldwide Corporation family of brands visit www.holdrite.com, www.sharkbite.com & www.cashacme.com.