training

Thursday, Nov. 21
12 noon – 1:00 p.m. CST

Ready or not, here comes the snow and ice season. Is your hydronic snow and ice melting (SIM) system ready-to-go? Do you have a design in mind, but need assistance with the final details? Returning to the webinar series, Max Rohr will dig into hydronic SIM systems, chip away at important design considerations and challenge you with questions to ask yourself when selecting controls.

You’ll learn:
→ How do I size a SIM system? What resources are available?
→ What is the SIM project objective: safety or convenience?
→ Should you use insulation under a SIM slab?
→ How do I keep my SIM system in top-notch shape?

Max is a graduate of the University of Utah. He currently serves as the REHAU Academy Manager (Leesburg, Va.). Max is a self-described hydronics and thermostat nerd. He has worked in the hydronics and solar industries for 20 years (or however many years Hot Rod is willing to admit to the Division of Child Labor) in the installation, sales and manufacturing sectors.

Coffee with Caleffi technical training webinars are free and intended for contractors, designers and wholesalers. By submitting your webinar registration, you are consenting to email communications to keep you up-to-date on industry news.   A Certificate of Attendance is emailed to attendees following the webinar.

→ Registration

If you have questions on webinar content, please direct them to bob.rohr@caleffi.com.

For the past 11 years, my job as a technical trainer has taken me from Alaska to Cuba, with many stops in between—I have been to all 50 states. Transitioning from a hands-on plumber to a talking head, standing in the front of the room addressing thirsty-for-knowledge contractors, took some getting used to.

No doubt the travel part of a “traveling trainer” job is the most challenging.  Hours spent squeezed inside an aluminum sausage, aka big, old jet-airliner, can be frustrating. I do love the views and amazing sunset and sunrises I have seen.  Lightning show, massive clouds are incredible, but they never look the same on the phone camera. For the most part the airline folks have been helpful and accommodating.

When they see the miles you rack up as a business traveler, they will almost always accommodate your request. Approaching them without a chip on your shoulder helps the outcome. Maybe it’s me, but it seems like a lot more delays and cancelations lately, busy times in the air travel business. So, I usually plan for some shuffling and exercise some chill skills. But I digress.

Once at the location, the fun part begins for me. I enjoy sharing what I have learned and listening to stories from attendees. For sure, my favorite parts of the job are the shop and jobsite visits. I learn from seeing how the new products and technology are actually being blended together on actual jobs. Browsing through the back rooms of the wholesaler and rep buildings can provide some good intel.

Living the Rock Star life.

I try to balance my training between product pitch and theory, applications, tips and tricks. It is important that the training sponsors advertise and promote the training accurately. If the training is intended to be all product and sales, that needs to be clear, so the folks attending know what to expect. Technical guys and gals prefer technical topics, from my experience.

I try to engage the group as much as possible, learn their skill level and expected outcome. Training for me is a give and take experience, as nobody knows it all. Except perhaps my wife. (Shhhh!) Generally, the room is a mix of expertise levels, so try to include info for everyone to leave with. Know your audience!

Hot Rod preparing for a Coffee with Caleffi webinar.

The dynamics of a room vary depending on the group. If you have a roomful of competitors, the questions do not flow so easily. Training at shops, reps and wholesalers always result in more interaction.

During the lunch break, spring for some food for the group, even if it is good pizza. Shop for the local brand favorite.

I’ve found a 4-hour maximum for tech heavy topics is a good lid for an event. It’s tough to keep a blue-collar person down as they need to keep moving. Their backs and knees make sitting for a long time challenging, too.

I always want to leave the attendees with a nice hard copy of the material we covered. The Caleffi Idronics are perfect handouts: They are a reference, both as a hard copy and online version. Also, it’s always nice to see the group taking notes in the margins.

Back at the office—in-house—I help produce the Coffee with Caleffi series, a webinar that cover important topics in the plumbing and hydronics industry.

If we haven’t met or shared a gab session together, I hope to do so soon. I’ll keep in communication with the Mechanical Hub community about dates and times for upcoming seminars, and webinars!

Bob ‘Hot Rod’ Rohr is director of training and education at Caleffi.

Classes to be held in Colorado and New Hampshire

Viega, LLC has announced its Fall 2019 lineup of courses at its seminar centers in Broomfield, Colo., and Nashua, N.H.

The offerings include topics from radiant design and LoopCAD software to press technology. With two fully equipped state-of-the-art seminar centers, Viega is an industry leader in supporting the trades and helping contractors become more versatile, skilled and efficient. To date, more than 40,000 people, from self-employed contractors to employees of large firms, have taken courses at the centers.

The classes are taught by experts with years of experience in the field and offer ample hands-on experience. Attendees leave with skills and knowledge that will show immediate benefits on the job.

Training seminars are listed below:

Radiant Design, Piping and Controls
Oct. 1-3, Nashua, N.H.
Dec. 4-6, Broomfield, Colo.
Covers design theory and practice, piping arrangements and control strategies. Includes hybrid systems, multiple temperature piping arrangements and system component placement.

LoopCAD
Oct. 29-30, Nashua, N.H.
Sept. 23-24 and Nov. 11-12, Broomfield, Colo.
How to use LoopCAD software for radiant design and layouts. Covers heat loss, drawing layout, material selection and snow melt.

Commercial Piping Solutions
Oct. 8-9 and Dec. 3-4, Nashua, N.H.
Oct. 2-3, Broomfield, Colo.
Covers Viega systems and products and their appropriate uses. Includes PureFlow, ProPress and MegaPress; hybrid systems; installation techniques; project savings; hands-on installation and competitive information.

Hydronics 101 & Radiant Systems
Oct. 22-23, Broomfield, Colo.
Provides a basic understanding of how hydronic systems work. Topics include methods of heat transfer, piping materials and components, control strategies and installation methods.

Carbon Steel Press Technology
Oct. 15, Nashua, N.H.
Covers the use of carbon steel press systems for residential, commercial and industrial piping applications.

Stainless Steel Press Technology
Nov. 14, Nashua, N.H.
Covers the use of stainless steel press systems for commercial and industrial plumbing, heating and piping applications. Properties and chemical compatibility of 304 and 316 stainless steel will be covered.

For more information and to register, click here.